2MP Medical Color LCD Monitor RadiForce GX220

GX220

Built-In Swing Sensor

Built-in swing sensor is conveniently enabled and visible only when remote quality control operations such as calibration are being performed.
Compatible with RadiCS and RadiNET Pro versions 2.5.0 and later.

10-Bit Simultaneous Grayscale Display

10-bit (1,024 tones) from a 13-bit look-up table (8,161 tones) can be displayed simultaneously for high-definition medical imaging.
10-bit graphics board and 10-bit viewer software needed for 10-bit display.

DUE for Brightness Uniformity

The Digital Uniformity Equalizer (DUE) function provides optimum backlight luminance uniformity which is considered difficult to attain due to the characteristics of LCD monitors.

Calibration Mode Selection

Selectable with the front panel buttons, the CAL Switch function allows for various calibration modes of different modalities such as CR, CT, and endoscope images. Furthermore, with ScreenManager Pro for Medical installed, auto mode settings can be made with the Auto CAL Switch function.

Independent Image Setting (IIS)

With the bundled ScreenManager Pro for Medical software, the Independent Image Setting (IIS) function allows for any specific area of an image to be adjusted and pre-set to various grayscale gradations and luminance levels.

LCD Panel Protector

This anti-reflective panel protector is pre-attached to the monitor at production for protection against dust and scratches.

Backlight Saver

With ScreenManager Pro for Medical utility software installed, the Backlight Saver function allows for the monitor's backlight to turn off when the screen saver is activated and the monitor's backlight to turn on when the computer comes out of the screen saver mode. This function helps to reduce power consumption when the monitor is used for a prolonged period of time.

Model

 

GX220-CL: Clear Base

Cabinet Color

 

Black

Panel

 

54 cm (21.3") TFT Monochrome LCD Panel (IPS)

Active Display Size (H x V)

 

324.0 x 432.0 mm

Viewable Image Size

 

Diagonal: 541 mm

Native Resolution

 

1200 x 1600

Pixel Pitch

 

0.270 x 0.270 mm

Grayscale Tones

 

1,024 from a palette of 8,161

Viewing Angles (H, V)

 

170°, 170°

Brightness

 

1000 cd/m2

Recommended Brightness for Calibration

 

500 cd/m2

Contrast Ratio

 

850:1

On/Off Response Time

 

23 ms (typical)

Scanning Frequency (H, V)

 

31 - 100 kHz, 48 - 71.5 Hz (VGA Text: 69 - 71 Hz)
Frame synchronous mode: 59 - 61 Hz

Dot Clock

 

165 MHz

Input Signals

 

DVI Standard 1.0

Input Terminal

 

DVI-D 24 pin

USB Ports

 

1 upstream, 2 downstream

USB Standard

 

Standard Rev. 2.0

Power Requirements

 

AC 100 - 120 V, 200 - 240 V: 50 / 60 Hz

Power Consumption

 

100 watts

Power Save Mode

 

Less than 3 watts

Sensor

 

Built-In Swing Sensor / Backlight Sensor

Power Management

 

DVI DMPM

OSD Languages

 

English, French, German, Italian, Japanese, Simplified Chinese, Spanish, Swedish, Traditional Chinese

Height Adjustment Range

 

82 mm

Pivot

 

90°

Tilt / Swivel

 

40° Up, 0° Down / 35° Right, 35° Left

Dimensions (W x H x D)

 

With Stand: 376 x 522.5 - 604.5 x 208.5 mm Without Stand: 376 x 500 x 94 mm

Net Weight

 

With Stand: 10.8 kg
Without Stand: 7.8 kg

Hole Spacing

 

VESA standard (100 x 100 mm)

Certifications and Standards

 

CE (Medical Device Directive), TÜV/GM (EN60601-1), cTÜVus (UL 60601-1, CSA C22.2 No. 601-1), CB (IEC60601-1), VCCI-B, FCC-B, Canadian ICES-003-B, c-Tick, FDA 510(k)*, CCC, RoHS

Supplied Accessories

 

AC power cord, user's manual, signal cable (DVI-D ~ DVI-D), USB cable, EIZO LCD Utility Disk (ScreenManager Pro for Medical software), ScreenCleaner, warranty card

 

* Display of mammography images for diagnosis is not supported.

 

This Manufacturer insists that companies do not list prices or provide the ability to order these Products on the Internet. They consider companies that list the price online as unauthorized resellers of their Plasma TVs. Purchasing products from an unauthorized reseller often disqualifies that product from manufacturer warranty, service, and support. Because we are an Authorized Reseller, and we want to insure that you have full warranty coverage, please call us at (914) 777-3615 for details

home | privacy | contact