3MP Medical Color LCD Monitor RadiForce R31

R31

10-bit Color Input Support

Each color (RGB) is supported with a 10-bit input compatibility that displays up-to 1,064,330,000 colors, providing highly-crisp resolution for 3D color rendering and image fusion.
10-bit color graphics board and 10-bit color viewer software needed for 10-bit color display.

Dual Link Input Support

With dual link input support, monitors achieved a clock frequency of 60 Hz even when displaying QXGA (1536 x 2048) resolution. This enables frame synchronization between the computer and the monitor, which reproduces a smooth moving picture without any dropping of frames.
Graphics board with dual link compatibility required.

Calibration Mode Selection

Selectable with the front panel buttons, the CAL Switch function allows for various calibration modes of different modalities such as CR, CT, and endoscope images. Furthermore, with ScreenManager Pro for Medical installed, auto mode settings can be made with the Auto CAL Switch function.

Lifetime Expectancy Analyzer (LEA)

The Lifetime Expectancy Analyzer (LEA) function provides an estimation of the remaining backlight lifetime for the service provider. It displays the time used since the purchase date, and the expected remaining lifetime depending on how often the monitor is used and at what luminance level.
Compatible with RadiCS version 2.00 and later.

Image Rotation

The Image Rotation function offers easy switching between portrait and landscape mode, which eliminates the need for special software. Since it is hardware rather than software, you don't lose drawing speed or system stability.

Independent Image Setting (IIS)

With the bundled ScreenManager Pro for Medical software, the Independent Image Setting (IIS) function allows for any specific area of an image to be adjusted and pre-set to various grayscale gradations and luminance levels.

LCD Panel Protector

This anti-reflective panel protector is pre-attached to the monitor at production for protection against dust and scratches.

Backlight Saver

With ScreenManager Pro for Medical utility software installed, the Backlight Saver function allows for the monitor's backlight to turn off when the screen saver is activated and the monitor's backlight to turn on when the computer comes out of the screen saver mode. This function helps to reduce power consumption when the monitor is used for a prolonged period of time.

Model

 

RadiForce R31: without Panel Protector
RadiForce R31-C: with Panel Protector

Cabinet Color

 

Black

Panel

 

53 cm (20.8") TFT Color LCD Panel (IPS)

Active Display Size (H x V)

 

318.0 x 423.9 mm

Viewable Image Size

 

Diagonal: 529 mm

Native Resolution

 

1536 x 2048

Pixel Pitch

 

0.207 x 0.207 mm

Display Colors

 

10-bit colors: 1.06 billion (maximum)
8-bit colors: 16.77 million from a palette of 1.06 billion

Viewing Angles (H, V)

 

170°, 170°

Brightness

 

R31: 400 cd/m2, R31-C: 350 cd/m2

Recommended Brightness for Calibration

 

R31: 250 cd/m2, R31-C: 220 cd/m2

Contrast Ratio

 

400:1

On/Off Response Time

 

50 ms (typical)

Scanning Frequency (H, V)

 

31 - 127 kHz, 59 - 61 Hz (VGA Text: 69 - 71 Hz, QXGA: 36 - 61 Hz)
Frame synchronous mode: 59 - 61 Hz

Dot Clock

 

215 MHz

Input Signals

 

DVI Standard 1.0

Input Terminal

 

DVI-D 24 pin

USB Ports

 

1 upstream, 2 downstream

USB Standard

 

Standard Rev. 2.0

Power Requirements

 

AC 100 - 120 V, 200 - 240 V: 50 / 60 Hz

Power Consumption

 

110 watts

Power Save Mode

 

Less than 3 watts

Sensor

 

Backlight Sensor

Power Management

 

DVI DMPM

OSD Languages

 

English, German, French, Italian, Japanese, Spanish, Swedish

Height Adjustment Range

 

82 mm

Pivot

 

90°

Tilt / Swivel

 

40° Up, 0° Down / 35° Right, 35° Left

Dimensions (W x H x D)

 

With Stand: 368 x 515.5 - 597.5 x 208.5 mm
Without Stand: R31 368 x 486 x 88.5 mm / R31-C 368 x 486 x 90 mm

Net Weight

 

With Stand: R31 9.2 kg / R31-C 10.0 kg
Without Stand: R31 6.2 kg / R31-C 7.0 kg

Hole Spacing

 

VESA standard (100 x 100 mm)

Certifications and Standards

 

CE (Medical Device Directive), TÜV/GM (EN60601-1), cTÜVus (UL60601-1, CSA C22.2 No. 601-1), CB (IEC60601-1), VCCI-B, FCC-B, Canadian ICES-003-B, FDA 510(k)*, CCC, EIZO Eco Products 2002, RoHS

Supplied Accessories

 

AC power cord, user's manual, Dual-Link signal cable (DVI-D ~ DVI-D), USB cable, EIZO LCD Utility Disk (ScreenManager Pro for Medical, ICC Profile), ScreenCleaner (R31-C only), warranty card

 

* Display of mammography images for diagnosis is not supported.

 

This Manufacturer insists that companies do not list prices or provide the ability to order these Products on the Internet. They consider companies that list the price online as unauthorized resellers of their Plasma TVs. Purchasing products from an unauthorized reseller often disqualifies that product from manufacturer warranty, service, and support. Because we are an Authorized Reseller, and we want to insure that you have full warranty coverage, please call us at (914) 777-3615 for details

home | privacy | contact